S.142 Series

A four customer distribution system that can work with two Dual or Twin LNBs, Quatro or Quad LNB.  The multi-switch allows connection of 4 different LNB signals (polarities) switched by 13/18V and 22kHz signal so it is possible to view all channels on each satellite receiver connected to the system. Signals from terrestrial TV and FM aerials can be fed into the fifth input (terr.input). Internal 22kHz generator allows utilization of Quad LNB.

S.142-A

5in/4out distribution system with passive terrestrial input, equipped with a DC socket for optional connection of an external + 18 V DC power supply.

S.142-C

Distribution system as above but with a built-in amplifier for terrestrial input. 

 

S.142-AP

5in/4out distribution system with passive terrestrial input, with an integrated power supply protected by a fuse.  The LED on the power supply indicates the power supply actively.  The LED goes off in case of short-circuit on the power supply output, as well as short-circuit on an input of the multi-switch. After power supply disconnection from the network and removal of the short-circuit case, the multi-switch power supply can be reconnected after a minute.

S.142-CP

Distribution system as above but with a built-in amplifier for terrestrial input. 

 

 

S.143-AP

5in/8out distribution system with passive terrestrial input, with an integrated power supply protected by a fuse.  The multi-switch can be used in connection with Dual, Twin, Quatro or Quad LNBs.  SAT inputs are switched by 13/18 V and 0/22 kHz from a receiver. Internal 22kHz generator enables high band reception with Quad LNB. For information on the power supply see S.142-AP.

S.143-CP

Same as above but with a built-in amplifier for terrestrial input. 

 

 

S.146-AP

5in/12out distribution system with passive terrestrial input, with 4 SAT inputs. Switching is done by 13/17V and 22kHz. It is equipped with a socket for optional connection of external + 18V DC power supply.

S.146-CP

Same as above but with a built-in amplifier for terrestrial input. 

 

 

 

S.147-AP

5in/16out distribution system with passive terrestrial input, with 4 SAT inputs, with an integrated power supply. For more information on the power supply see S.142-AP. The multi-switch can be used in connection with all types of LNBs. Input level can be adjusted by attenuators in range of 158dB..

S.147-CP

5in/16out distribution system with a built-in amplifier for terrestrial input. 

 

 

S.148-CP-24

7 input distribution systems capable to deliver both satellite and terrestrial signals for up to 24 users. Due to built-in frequency diplexer for FM, DAB and UHF bands it is possible to connect all necessary antennas directly to the multi-switch. For possible use of UHF masthead amplifier 12V power is supplied on UHF input, over current  protection circuitry switches this power off when DC short is detected on the UHF input. Both satellite and terrestrial inputs are equipped with 15dB adjustable attenuators. For optimal level balancing the multi-switch offers three groups of outputs with insertion loss 0, 5 and 10dB, each group consists of 8 outputs. Total number of outputs in standard configuration is 24, other arrangements are available upon request

 

 

S.149 Series

These multi-switches are designed for use in extended distribution systems, where channels from one satellite position are distributed to 20-28 users, together with terrestrial signals. Integrated power supply is protected by a fuse and short-circuit protection with an audible alarm. In case of a short-circuit on a SAT input, the LED goes off. After power supply disconnection from the network and removal of the short-circuit cause, the multi-switch power supply can be reconnected after a minute. A masthead terrestrial amplifier can be powered from internal short-circuit protected DC supply 12V/max. 100mA, which is applied to terrestrial input. The S.149 series is equipped with an internal 22kHz generator. The multi-switch can be used in connection with Dual, Twin, Quatro or Quad LNBs.  

 

 

S.149-AP-20

5in/20out distribution system with passive terrestrial input.

.S.149-CP-20

5in/20out distribution system with a built-in amplifier for terrestrial input.

 

 

S.149-AP-24

5in/24out distribution system with passive terrestrial input.

.S.149-CP-24

5in/24out distribution system with a built-in amplifier for terrestrial input.

 

 

S.149-AP-28

5in/28out distribution system with passive terrestrial input.

.S.149-CP-28

5in/28out distribution system with a built-in amplifier for terrestrial input.

 

 

S.131 Series

Is a four customer IF distribution system. It can be used in connection with either “Dual” or “Twin” LNB. The multi-switch neither transmits 22kHz signal for high band reception, nor passes 22kHz tone from receivers. When the power supply of the satellite receiver is unable to supply enough power to both multi-switch  and LNB assembly, it may be necessary to connect an external + 18V DC power supply (preferably stabilized) to the multi-switch. The power supply delivers DC current to the LNB assembly through circuits in the multi-switch. For this purpose there is a special socket on the multi-switch marked + 18V.

 

S.131-F

3in/4out distribution system with passive terrestrial input, usable with Twin or Dual LNB.

.S.131-G

3in/4out distribution system with active terrestrial input, usable with Twin or Dual LNB.

   

 

 

 

S.134-A

3in/4out distribution system which can be used in connection either with “Dual” or “Twin” LNB. SAT inputs are switched by 13/18V from each satellite receiver.  The multi-switch does not transmit 22kHz signal for high band reception, and does not pass 22kHz tone from receivers. It is equipped with a socket for optional connection of an external +18 V DC power supply.. 

 

 

 

S.132-AP

3in/4out distribution system with an integrated power supply with passive terrestrial input. It can be used either with “Dual” or “Twin” LNB, switching between inputs is done by 13/18 V from a receiver. The multi-switch does not transmit 22kHz signal for high band reception and does not pass 22kHz tone from receivers. The power supply unit is protected by a fuse.  The LED on the power supply indicates the power supply activity. The LED goes off in case of short-circuit on the power supply output, as well as short-circuit on an input of the multi-switch.

S.132-CP

3in/4out distribution system alike the S.132-AP, but with a built-in amplifier for terrestrial input. 

 

 

 

 

S.133 Series

3in/8out distribution system. SAT inputs are switched by 13/18V.  It can be used either with “Twin” or “Dual” LNB. The multi-switch does not transmit 22kHz signal for high band reception and does not pass 22kHz tone from receivers.

 

S.133-A

3in/8out distribution system with passive terrestrial input, equipped with a socket for optional connection of an external + 18V DC power supply.

 S.133-C

3in/8out distribution system with active terrestrial input, equipped with a socket for optional connection of an external + 18V DC power supply.

 

 

 

 

 

S.133-AP

3in/8out distribution system with an integrated power supply. The device is usable with both Dual and Twin LNB. Switching is done by 13/18 V from the satellite receiver. The multi-switch does not transmit 22kHz signal for high band reception and does not pass 22kHz tone from receivers. For more information on the power supply, see 132-AP.

 S.133-CP

3in/8out distribution system is similar to the 133-AP but with a built-in amplifier for terrestrial input.

 

 

 

 

 

S140-A

5in/4out distribution system with passive terrestrial input and with 4 SAT inputs. Switching is done by 13/18 V and 22kHz.  It is equipped with a socket for optional connection of an external + 18V DC power supply.  This type is not compatible with Quad LNBs.